Title: Garrett GT1749V 724930 Hybrid Turbocharger for VW Golf 5 2.0TDI Bkd

  
Garrett GT1749V 724930 Hybrid Turbocharger [VW Golf 5 2.0TDI] Bkd. This product listing is originally written in English. Please find below an automatic translation into French. If you have any questions, please contact us. Garrett GT1749V 724930 HYBRID TURBOCHARGER BILLET AUDI SEAT SKODA VW 2.0 TDI BKD AZV PD140. [STAGE 1 200 BHP] GUARANTEED DURABILITY AND FASTER SPOOL. No mapping required but will work well with STAGE 1 or ECO mapping. This turbocharger has been completely stripped down, standard parts replaced with the following upgraded parts: Custom-made super lightweight 50mm billet compressor wheel (made in Germany) Small nose hub resulting in larger blade surface Reverse thread shaft nut All-new vacuum actuator Large stainless steel thrust collar Latest high-temperature resistant ball bearings 360?? Race thrust bearing with high pad thrust Rear and front high-temperature oil seals with stepped spacing. Balanced turbocharger CHRA core using VSR400'' TurboTechnics'' platform, at a speed range higher than the standard 180,000 rpm. With tolerances of 0.5g. FITS THE FOLLOWING VEHICLES Audi A3 2.0 TDI (8P/PA). Seat Altea 2.0 TDI. Seat Leon 2.0 TDI.

Seat Toledo III 2.0 TDI. Skoda Octavia II 2.0 TDI. Volkswagen Golf V 2.0 TDI. Volkswagen Passat B6 2.0 TDI. Volkswagen Touran 2.0 TDI.

In order to run our hybrid turbo smoothly, you would need some mods, to achieve the best results and avoid any. Once the larger turbocharger is installed, we recommend immediately remapping the engine on the rolling road. This upgrade does not require any mods or ecu remap, but would work well with STAGE 1 or eco map + EGR and CAT delete.

Other essential requirements when fitting the STAGE 1 Falcon hybrid turbo. New high-quality oil and oil filter. New oil supply pipe [Available to purchase from us, please contact us for more information].

New gasket kit [Supplied with the new turbo]. All work must be carried out by a professional garage or qualified technician. Upgraded bearings and seals: Staggered exhaust and compressor piston rings + double oil feed thrust bearing, large bearing. Extended tip billet compressor wheel: Lightweight, machined from solid aluminum compressor wheel, it is much.

Stronger and lighter than the standard cast aluminum wheel. Larger billet compressor wheel and billet backplate: Stage 2 hybrid turbos benefit from generally larger 5-7mm. Increase in billet compressor wheel and custom billet backplate. The compressor cover is precisely machined to fit the larger.

Larger high-flow shaft: Stage 3 turbos are equipped with larger high-flow shafts to handle excessive exhaust gases. Flow due to increased boost and fuel injection. High-flow shafts have larger blades that will allow more exhaust gases. They are also lighter due to improved design.

GTB2260V Original wheel shaft weight 175 g, Falcon Turbo Developments. Lightweight shaft weight upgrade only 135 g. Upgraded actuator wastegate: All Stage 3 turbos will come with upgraded actuators with different spring load settings. For optimal boost pressure and range.

The customer will be required to pay interest on any late payment at the prevailing base rate of Lloyds Bank plus 2%. Credit account 2.1 Where it is agreed that a customer will be allowed to credit a particular order, Falcon Turbo Developments LTD (hereinafter referred to as FTD LTD) will raise an invoice for goods supplied in accordance with that order. The customer will pay the full amount due under the invoice no later than 10 working days. Exchange product 3.1 Falcon Turbo Developments LTD will not accept old units for exchange unless they meet the following specifications (i) The unit must be complete and in no way dismantled (ii) The unit must not have suffered any accidental or deliberate damage. Surcharge 4.1 Where it is agreed at the time of sale that an old unit will form part of the consideration provided by the customer and the old unit is not provided by the customer to FTD LTD at the time of sale, a surcharge will be payable by the customer.

This surcharge will be refunded by FTD LTD to the customer provided that the old unit which is agreed to form part of the consideration is provided by the customer to FTD LTD within 14 days of the sale and provided that this old unit meets the specifications set out in clause 3 of these general terms and conditions when so provided. If the customer does not return the exchange unit within 14 days, the turbocharger warranty will be voided and the refund retained by the seller. Warranty 5.1 If products manufactured by FTD LTD prove to be defective during the warranty period due to material or manufacturing defects, FTD LTD will, at its discretion, provide a replacement product or repair such defective products free of charge. If the supplier's official report, the report of an independent specialist or any other official report indicates that the turbocharger is not defective or is defective due to installation or engine failure, additional charges for testing or other expenses must be covered by the buyer. 5.2 The warranty period is as stated on receipt and takes effect from the date of invoicing.

5.3 The warranty is between FTD LTD and the customer extending to the first end user of the initial sale ("first end user"). In the event that the first end user sells the vehicle or engine on which the turbocharger supplied by Turbocare24 is mounted, the benefit of the unexpired part of this warranty does not automatically pass to the new owner. 5.4 FTD LTD shall not be liable under the warranty if the vehicle on which the FTD LTD product is fitted is not properly maintained in accordance with the vehicle manufacturer's recommendations.

5.5 FTD LTD shall not be liable under the warranty if the standard turbocharger supplied by them and/or the vehicle's engine on which it is fitted is/are modified to increase power output. 5.5.1 Stage 2 and 3 hybrid turbos supplied by FTD LTD must be fitted and remapped at the same time by a professional road tuning company. The vehicle equipped with a hybrid turbo must not be driven before being mapped, as this would increase the exhaust gas temperature and damage the turbo/engine.

5.5.2 Hybrid turbos must be fitted with supporting mods and not exceed the recommended specifications. 5.6 FTD LTD is only liable under the warranty if the turbocharger is fitted by a professional garage, which can prove its work and parts ordered by receipt.

5.7 The warranty does not cover damage to the turbocharger caused by impact from a foreign object from the exhaust or air intake, oil starvation/contamination, overboost, or excessive exhaust gas temperature and pressure. 5.7 The FTD LTD turbocharger warranty report must be carefully studied and work must be carried out in accordance with the provided information. 5.8 The FTD LTD warranty does not apply to turbochargers used for any form of racing.

Limitation of Liability 6.1 Except as expressly provided for herein, all representations, conditions, warranties and terms, whether express or implied, under common law, statute, or otherwise, as to the quality, condition, or fitness for any purpose of goods supplied by FTD LTD are excluded. 6.2 Receipt of information from the customer and delivery by FTD LTD of the goods specified in any order shall in no way imply a term that the goods will be fit for the purposes described. 6.3 In no event shall FTD LTD be liable for any direct or indirect, consequential or other loss or damage of any kind, whether arising from the contract of sale or manufacture or installation or use of goods supplied by them, or any other cause, nor for any diminution in value of other goods or components, whatever the cause, resulting from or arising out of the use of FTD LTD products. 6.4 Without prejudice to the foregoing, the liability of FTD LTD, whether arising out of contract, negligence or otherwise, shall in no event include damages for the cost of labor for the removal and reinstallation of any turbocharger. 6.5 Without prejudice to the foregoing, the liability of FTD LTD, whether arising out of contract, negligence or otherwise, shall in no event include damages for loss of enjoyment or travel expenses. 6.6 Without prejudice to the foregoing, the liability of FTD LTD, whether arising out of contract, negligence or otherwise, shall in no event include damages for loss of profit. 6.7 Without prejudice to the foregoing, FTD LTD's liability on any claim for loss or liability arising from or in connection with any order, or the manufacture, sale, delivery, resale or use of any goods covered by such order (including loss or liability arising from breach of contract and/or negligence) shall in no event exceed the ex.

VAT unit selling price of the goods or parts of goods which are the subject of the claim. 6.8 Without prejudice to the foregoing, FTD LTD shall not be liable for bodily injury or damage to an engine or vehicle caused by a defective turbocharger where such turbocharger has been fitted to a modified engine or if the vehicle is used in any form of racing. 6.9 None of the above exclusions or restrictions of liability of FTD LTD shall apply to any claim for death or personal injury resulting from their negligence.

By making this purchase, I confirm that I accept all the above terms and conditions of sale. 4.1 Where it is agreed at the time of sale that an old unit will form part of the consideration provided by the customer and the old unit is not provided by the customer to FTD LTD at the time of sale, a surcharge will be payable by the customer. 5.1 If products fa