Billet Garrett Hybrid Turbocharger Audi Seat Skoda VW 2.0 TDI BKD AZV PD140

  
Garrett Hybrid Turbocharger Audi Seat Skoda VW 2.0 Tdi Bkd Azv PD140. This product description is originally written in English. Please find below an automatic translation in French. If you have any questions, please contact us. Garrett GT1749V 724930 HYBRID TURBOCHARGER BILLET AUDI SEAT SKODA VW 2.0 TDI BKD AZV PD140. [STEP 1 200 BHP] DURABILITY AND FASTER SPOOL GUARANTEED. No mapping required but will work well with STAGE 1 or ECO mapping. This turbocharger has been fully stripped, standard parts replaced with the following upgraded parts: Custom super lightweight 50mm billet compressor wheel (made in Germany) Small nose hub resulting in larger blade surface Reverse thread shaft nut All-new vacuum actuator Large stainless steel thrust collar Latest high-temperature resistant ball bearings 360??

Race thrust bearing with high pad thrust High-temperature staggered spacing rear and front oil seals. Balanced CHRA turbocharger core using the VSR400'' TurboTechnics'' platform, at a higher than standard 180,000 rpm speed range. With tolerances of 0.5g. Audi A3 2.0 TDI (8P/PA).

Seat Altea 2.0 TDI. Seat Leon 2.0 TDI. Seat Toledo III 2.0 TDI. Skoda Octavia II 2.0 TDI. Volkswagen Golf V 2.0 TDI. Volkswagen Passat B6 2.0 TDI. Volkswagen Touran 2.0 TDI. In order to smoothly operate our hybrid turbocharger, you would need some mods, to achieve the best results and avoid any engine or turbocharger damage. Once the larger turbocharger is installed, we recommend immediately remapping the engine on the rolling road. This upgrade does not require any mods or ECU remap, but would work well with stage 1 or eco map + EGR and CAT delete. Other essential requirements when fitting the STAGE 1 Falcon hybrid turbo. New high-quality oil and oil filter. New oil feed pipe [Available for purchase from us, please contact us for more information].

New gasket kit [supplied with the new turbocharger]. All work must be carried out by a professional garage or qualified technician. Upgraded bearings and seals: Staggered spacing exhaust and compressor piston rings + double oil feed thrust bearing, large bearing. Extended tip billet compressor wheel: Lightweight, machined from a solid billet aluminum compressor wheel is much.

Stronger and lighter than the standard cast aluminum wheel. Larger billet compressor wheel and billet backplate: Stage 2 hybrid turbos benefit from larger generally 5-7mm.

Increased billet compressor wheel and custom billet backplate. The compressor cover is precisely machined to fit the larger. Larger high-flow shaft: Stage 3 turbos are equipped with larger high-flow shafts to cope with excessive exhaust gas. Flow due to increased boost and fuel injection.

High-flow shafts have larger blades that will allow more exhaust gas. They are also lighter due to improved design. GTB2260V Original wheel shaft weight 175g, Falcon Turbo Developments. Upgraded light shaft weights only 135g.

Improved actuator wastegate: All stage 3 turbos will come with upgraded actuators with different spring load settings. For optimal boost pressure and range.

The customer will be liable to pay interest on any late payments at the current base rate of Lloyds Bank plus 2%. Credit Account 2.1 Where it has been agreed that a customer shall be allowed credit for a particular order, Falcon Turbo Developments LTD (hereinafter referred to as FTD LTD) will raise an invoice for goods supplied pursuant to that order.

The customer shall pay the whole of the amount due under the invoice no later than 10 working days. Exchange Product 3.1 Falcon Turbo Developments LTD will not accept old units for exchange unless they meet the following specifications (i) The unit must be complete and in no way dismantled (ii) The unit must not have suffered accidental or deliberate damage. Surcharge 4.1 Where it has been agreed at the time of sale that an old unit will form part of the consideration to be provided by the customer and the old unit is not provided by the customer to FTD LTD at the time of sale, a surcharge will be payable by the customer. This surcharge will be reimbursed by FTD LTD to the customer provided that the old unit which it has been agreed will form part of the consideration is provided by the customer to FTD LTD within 14 days of the sale and provided that such old unit meets the specifications of clause 3 of this agreement at the time it is so provided. If the customer fails to return the exchange unit within 14 days, the warranty on the turbocharger will be void and the refund retained by the seller.

Warranty 5.1 If products manufactured by FTD LTD are found to be defective during the warranty period due to a material or manufacturing defect, FTD LTD will, at its discretion, either provide a replacement product or repair such defective products free of charge. If the supplier's official report, the report of an independent specialist, or any other official report indicates that the turbocharger is not defective or is defective due to an installation or engine defect, additional charges for testing or other expenses must be covered by the buyer.

5.2 The warranty period is as stated on receipt and takes effect from the date of invoicing. 5.3 The warranty is between FTD LTD and the customer extending to the first end-user of the initial sale ("first end-user"). In the event that the first end-user sells the vehicle or engine on which the turbocharger supplied by Turbocare24 is mounted, the benefit of the unexpired portion of this warranty does not automatically pass to the new owner. 5.4 FTD LTD shall not be liable under the warranty if the vehicle on which the FTD LTD product is fitted is not properly maintained in accordance with the manufacturer's recommendations. 5.5 FTD LTD shall not be liable under the warranty if the standard turbocharger supplied by them and/or the engine of the vehicle on which it is fitted is/are modified to increase the power output.

5.5.1 Stage 2 and 3 hybrid turbos supplied by FTD LTD must be fitted and remapped at the same time by a professional tuning company on the rolling road. The vehicle fitted with a hybrid turbo must not be driven before being mapped, as this would increase the temperature of the exhaust gases and damage the turbo/engine. 5.5.2 Hybrid turbos must be fitted with supporting mods and not exceed the recommended specifications. 5.6 FTD LTD is liable under the warranty only if the turbocharger is fitted by a professional garage, which can prove their work and the parts ordered by till receipt. 5.7 The warranty does not cover damage to the turbocharger caused by impact from a foreign body from the exhaust or intake, oil starvation/contamination, overboost, or excessive exhaust gas temperature and pressure.

5.7 FTD LTD's turbocharger warranty report should be carefully studied and work should be carried out in accordance with the information provided. 5.8 FTD LTD's warranty does not apply to turbos used for any form of racing. Limitation of Liability 6.1 Except as expressly provided in these terms and conditions, all representations, conditions, warranties, and terms, whether express or implied, under common law, statute, or otherwise, as to the quality, condition, or fitness for any purpose of the goods supplied by FTD LTD are excluded. 6.2 Receipt of information from the customer and delivery by FTD LTD of the goods specified in any order shall in no way imply a term that the goods will be fit for the purposes described. 6.3 Under no circumstances shall FTD LTD be liable for any direct or indirect, consequential or other loss or damage of any kind, arising out of or in connection with the contract of sale or the manufacture or installation or use of goods supplied by them, or for any reduction in value of other goods or components, whatever the cause, resulting from or arising out of the use of FTD LTD products.

6.4 Notwithstanding the above, FTD LTD's liability, whether arising in contract, negligence or otherwise, shall in no circumstances include damages for the cost of labor for the removal and refitting of any turbocharger. 6.5 Notwithstanding the above, FTD LTD's liability, whether arising in contract, negligence or otherwise, shall in no circumstances include damages for loss of enjoyment or traveling expenses. 6.6 Notwithstanding the above, FTD LTD's liability, whether arising in contract, negligence or otherwise, shall in no circumstances include damages for loss of profit.

6.7 Notwithstanding the above, FTD LTD's liability in respect of any claim for loss or liability arising out of or in connection with any order, or the manufacture, sale, delivery, resale, or use of any goods covered by such order (including loss or liability arising out of breach of contract and/or negligence) shall in no circumstances exceed the ex. VAT unit sale price of the goods or part of the goods which are the subject of the claim. 6.8 Notwithstanding the above, FTD LTD shall not be liable for personal injury or damage to an engine or vehicle caused by a defective turbocharger where such turbocharger has been fitted to a modified engine or where the vehicle is used in any form of racing. 6.9 None of the above exclusions or limitations of FTD LTD's liability shall apply to any claim for death or personal injury resulting from their negligence. By making this purchase, I confirm that I accept all the above terms and conditions of sale.

4.1 Where it has been agreed at the time of sale that an old unit will form part of the consideration to be provided by the customer and the old unit is not provided by the customer to FTD LTD at the time of the sale, a surcharge will be payable by the customer. 5.1 If products fa. Audi, A3, A 3, 2.0, TDI, 8P, PA, Seat, Altea.

Leon, Toledo, Skoda, Octavia, Volkswagen, Golf. ATOMBMC, 2.0 TDI, VW Passat, Volkswagen Passat.

Audi A3, B6, b 6, Turbochargers, Saloon. 103 kW, Seat Leon, Seat Tolego, Volkswagen golf.